The MCA of Omaha, Inc. and UA Local 464 have partnered to distribute hand sanitizer to their members in the field. Together, Brad Bird, the Business Manager of UA Local 464, and Kelsey Johnson, the Executive Vice President of the MCA of Omaha, developed a distribution plan for 225 gallons of hand sanitizer donated through the Nebraska Ethanol Board.
The hand sanitizer was manufactured by the University of Nebraska–Lincoln in a collaborative project between several partners on the campus, including the College of Engineering, the Institute of Agriculture and Natural Resources, the Food Processing Center, and the Nebraska Innovation Campus.
On Tuesday, April 28, each of the contractors that requested hand sanitizer sent one representative to pick up the sanitizer from the union hall.
Kelsey Johnson and the MCA of Omaha feel fortunate to be able support their members in a safe way. “This was an incredible effort by us and Local 464. Now more than ever, we all need to work together with our labor partners to keep our members safe and informed.”
The Labor Management Cooperation Committee (LMCC) has made a $5,000 donation to the University of Nebraska Foundation to help keep the hand sanitizer project going.
“We are lucky to have the hand sanitizer donated to us, and to have a great relationship with our [UA] local. As more [hand sanitizer] comes in, we will continue to distribute it out to our contractors and their essential workers, who are having a really hard time finding any hand sanitizer.”
Mechanical Contractors Association of America teamed up with industry partners, including the Associated General Contractors , FCA International, International Council of Employers of Bricklayers and Allied Craftworkers (ICEBAC), National Electrical Contractors Association, Sheet Metal and Air Conditioning Contractors’ National Association, Signatory Wall And Ceiling Contractors Alliance and the Association of Union Constructors in a joint letter to Congress regarding the multiemployer pension plans, which provide retirement benefits to over 10 million Americans.
MCAA members can now download the 2020 edition of MCAA’s Change Orders, Productivity, Overtime—A Primer for the Construction Industry. The revamped resource provides guidance to contractors that are looking to measure the impact that delays, PPE and manpower limitations have on the construction sites that they are working on. The guide helps contractors identify and quantify activities before and after the start of the pandemic in order to build change orders correctly.
As the guide’s lead author, Paul L. Stynchcomb, CCM, PSP, CFCC of Vero Construction Consultants Corp. puts it, “One way that you are going to have to address this issue is measuring time impacts. So the starting point is to measure any schedule time impacts as of the commencement of the impacts of the pandemic on your project site. That means you need to identify any pre-existing delay conditions.”
As an additional resource, Paul Stynchcomb was joined by Douglas Patin and William Ibbs from the Ibbs Consulting Group on April 15, 2020 to address the Construction Management Consequences of the Coronavirus and Legal Responses. MCAA members can review the webinar for free at any time.
New Chapter Highlights Benefits of Sharing Native CPM Schedule Files
As some of the most labor-intensive trades on any project, mechanical, plumbing, electrical and sheet metal contractors are intently interested in project planning, activity sequencing, timing of the work and efficient crew flows. In a new chapter for the 2020 edition of MCAA’s Change Orders, Productivity, Overtime—A Primer for the Construction Industry, lead author Paul L. Stynchcomb, CCM, PSP, CFCC of Vero Construction Consultants Corp. discusses the essential concept of sharing the critical path method (CPM) schedule in its native form between all of the major trades on a construction project as a tool for enhancing cooperation, profitability and timeliness.
Only the prime or construction manager’s CPM schedule for the entire project scope of work provides the full picture that will enable these contractors to deliver projects to the benefit of all parties, Stynchcomb posits. He notes that printouts, bar chart graphics and PDF files of the CPM schedule are a poor substitute since they provide only a snapshot of the plan at a specific point in time.
Shared access to the native CPM schedule files adds transparency to the construction management and scheduling process, which is key to effectiveness on today’s complex and challenging construction projects. In most cases, projects that have a cooperative and interactive management style are more profitable and timely, and efficiently, completed. This means bottom line benefits for all involved.
Lawrence M. Prosen, Esquire of Kilpatrick Townsend & Stockton, LLP provided the case citations and some general commentary contained in some sections of the chapter.
Peer Reviewers Add Industry Expertise
This latest chapter, like the others in the publication, was peer reviewed by a panel of industry professionals. Peer review was performed by Robert Beck, President/CEO of John W. Danforth Company in Tonawanda, NY; Rick Freeman, Executive Vice President, Southern Insulation, Inc. in Hyattsville, MD; Brian Helm, President of The Helm Group in Freeport, IL; and Denis St. Pierre, Executive Vice President & COO of Alterman in Austin, TX.
The American Subcontractors Association (ASA) has also renewed its full support for the contents of this publication as applicable to their particular trades.
Other Topics Addressed
In addition to the new chapter, the publication assists labor intensive contractors and subcontractors in concepts of proactive project management such as CPM scheduling, labor planning and productivity tracking, change management and settlement negotiations, dispute resolution, claims avoidance and, if necessary, claims preparation and presentation.
The object of this publication is to sensitize construction professionals of all trades to enable the early identification of obstacles to a successful project, and to proactively manage such obstacles to mitigate or eliminate their impact to the bottom line, to the benefit of all of the project participants.
MCAA Members – Download Your Free Copy!
MCAA members can download the publication free as a benefit of membership. Printed books are also available for purchase at a discounted rate.
Arden Engineering Constructors recently completed work on two COVID-19 field hospitals which add 935 patient beds for the anticipated COVID-19 surge in Rhode Island. The project had two 12-hour shifts running seven days a week from the time it began on April 6 until completion on April 18.
Arden provided and installed all of the HVAC piping, plumbing, ductwork, and medical gas piping for the project. Their in-house fabrication shop created finished bathroom piping systems ready for installation.
Unique Metal Works, an Arden Building Company, fabricated and installed approximately 6,000 feet of spiral exhaust ductwork with connection to plenum to provide “negative air flow” and prevent the escape of possible contamination. Their ability to do this provided both cost efficiencies and greater quality control for the project.
Earthwise Energy Technologies of Arden Building Companies, installed the monitoring and alarming for the negative pressure exhaust systems in the patient and pharmacy areas. The systems are monitored remotely using a graphic interface that allows needed adjustments to be made at any time, from anywhere.
MCAA thanks Arden Engineering Constructors for their efforts in support of healthcare providers, and for providing alternative care facilities for COVID-19 patients.
The full-featured digital version of our Membership Directory & Buyer’s Guide enhances the look and feel of our directory with digital-only benefits to help you:
Network from anywhere with linked email addresses.
Connect with the companies, products and services that interest you using linked web addresses.
Get where you’re going…fast…with bookmarks and a linked table of contents.
Find advertisers instantly with a linked advertiser index.
MCAA’s Membership Directory & Buyer’s Guide is free as a member benefit. Printed directories will be sent to members in the next few weeks.
This educational video provides users with an overview of the next generation of WebLEM — WebLEM+Plus. In this video, you will learn how labor units are created for both the Component and the Work Activity Method (WAM) and what factors are considered in creating labor units. The video highlights the new and enhanced features of WebLEM+Plus. You will learn how to navigate the updated software, how to access Component and Work Activity labor units and how to locate information associated with each product. The video will also walk you through a detailed example of how to use the Work Activity Method (WAM). Included in the recording is an overview of the work our industry’s manufacturers and content providers are doing to connect their product data and drawing content to the WebLEM+Plus. Welcome to WebLEM+Plus, the next generation of the industry standard for estimating labor hours.
As the new Senate bill was passed by the House on April 23, 2020, the Paycheck Protection Program (PPP) gained additional emergency funds. MCAA partners and law firm, Lindabury, McCormick, Estabrook & Cooper, P.C., provide an overview of the program application and loan forgiveness requirements to assist MCAA members.
Murphy Company is playing an important role in their communities’ fight against the COVID-19 pandemic. As the number of citizens requiring hospitalization has surged, so has the need for additional isolation rooms on a quick-turn schedule. The pandemic has presented additional challenges, and Murphy Company has met them all with innovative and fast-moving solutions.
St. Joseph Hospital
In an effort to convert standard patient rooms to negative pressure rooms, Murphy’s creative team figured out a way to install temporary ductwork along the building by feeding the room through a window, with HEPA filtration located on the roof of the St. Charles, MO hospital.
The fast-paced project converted rooms in 17 hours with an average crew size of six working around the clock (7:00 am – 12:00 am).
St. Anthony North Health Campus
Murphy Company converted a floor of standard patient rooms to negative pressure rooms for this job. From inception to turnover, this was done in 7 calendar days.
Project Timeline
April 1: Design team finalized plans and drawings with the St. Anthony North Health Campus team
April 2: Crew started layout, sketched and moved to fabrication
April 3: Roof curbs were installed
April 4: A weekend crane pick was staged to install the new exhaust fans. The sheet metal shop worked around the clock to complete the ductwork fabrication needed the next day
April 5: Ductwork arrived on site and was installed
April 6: Started and balanced the first two fans and turned over 15 rooms for the hospital to use that night
April 7: The last fan was started up, and the remaining 14 rooms were turned over in the afternoon
SSM Health DePaul Hospital
Murphy Company orchestrated work on three negative pressure rooms for the Intensive Care Unit (ICU) at DePaul Hospital.
Kelly Pearce, Incident Commander at DePaul Hospital, praised Murphy Company for its work, saying, “I want to pass on my personal gratitude as the incident commander for DePaul Hospital as well as from the perspective of my ICU nursing background for the work your teams did for us last night.”
“From the time we said ‘go’ around 16:45 yesterday afternoon, Jim Wesling and others from Murphy and Kaiser were able to convert 16 ICU rooms on 3N from normal airflow to airborne infection isolation (AII) negative pressure standards by 04:30 this morning,” she added. “Their actions have made it safer for our staff and providers to care for patients infected with COVID-19 and to provide more peace of mind to the staff working through this very turbulent situation.”
Handwashing Stations
Murphy Company needed a way for its employees to wash their hands when the public areas of jobsites were closed due to COVID-19.
Vice President Scott McIntosh came up with the idea of creating portable sinks to bring on sites. The fabrication shop was challenged with the idea, and a prototype was created in 2 days.
The project started in Murphy Company’s Denver office, and was immediately supported by management in the St. Louis office.
The first prototype was a rectangular sink created using a stainless steel countertop and a Knaack cart. A hot water heater was installed in the cart’s cabinet. Water was supplied via a garden hose, and the stainless steel holding tank, with a capacity of +/- 20 gallons of wastewater, was drained via a garden hose. This option proved to be expensive due to the cost of the materials involved.
A second, less expensive option was developed next. The round sink, which is strapped to a dolly for portability, features a hands-free, sensor-powered water faucet and soap dispenser. This prototype has rear water-source hookups (hose into the valve) and a drain in the front to allow the water to deplete from the unit itself. The wastewater storage capacity is +/- 40 gallons.
The round sink was self-contained and required only 120VAC to power a small pump and instant heater. Water fed from a 5-gallon water jug and was disposed of in a 5-gallon bucket. The original design was adapted to replace the self-contained water and waste system. This meant removing the pump and adding a 2.5 gallon electric water heater in its place. This option allows jobsites to have a moderate amount of warm water for proper hand washing without the concern of running out of water or filling a waste container.
The Denver fabrication shop shared the drawings with the St. Louis shop, which used the materials available to them to create their iterations of the rectangular and round sinks.
Senior Vice President Robert Mathisen said, “We are now looking at a much less expensive prototype that does not include a hot water heater and is also for smaller construction sites. We are also looking at alternative components to reduce cost. One consideration was to incorporate a ‘hands-free’ faucet and a ‘hands-free’ soap dispenser to avoid touching of surfaces where contamination could reside.”
The projects were done by Murphy Company’s union tradesmen and women from Colorado Locals 3, 9, and 208, and Missouri Locals 36 and 562.
Murphy Company plans to deploy the sinks to jobsites that need them in Colorado, Wyoming, Missouri, and Illinois.
MCAA thanks Murphy Company for their efforts in helping to limit the impact of the COVID-19 pandemic, and for their contributions to the safety and health of both their employees and the general public.
Congratulations to Bryce Danielson, one of the two recipients of the Alan O’Shea Memorial Scholarship. The Mechanical Contractors Association of New Jersey established the scholarships to honor the memory of Alan O’Shea, its former Executive Director, and memorialize his many contributions to the mechanical contracting industry.
Bryce is a sophomore from the University of Nebraska studying Construction Management. He joined the student chapter in his freshman year and has attended both the MCAA Annual Convention and the GreatFutures Forum.
“The amount of support that the mechanical contracting industry has for students like me is what has drawn me towards a future career in this industry,” Bryce said. “Whether it is through the local contractors, my local student chapter, or the national association, I feel as if there is always someone to help and support my future career.”
His local contractor mentor showed him a job site and explained how the process works, answering his questions along the way. The student chapter has provided internship and networking opportunities, along with the chance to learn new things through its monthly meetings. MCAA events have also provided networking opportunities, along with real-world experience through the Student Chapter Competition, and a chance to learn from world-class speakers and industry professionals.
Ray Martin Company Internship Experience
Bryce has been interning for Ray Martin Company, an MCAA member, since May 2019. “I have been challenged with many tasks which include estimating and preparing bids, writing purchase orders and subcontracts, and helping with project management duties. They gave me opportunities that no other company would give a first-year intern.”
“I look forward to putting everything I have learned in college to work,” Bryce said, adding that “It’s one thing to learn about managing a large-scale project and another to actually do it. This is what I enjoy the most about mechanical contracting because almost every day is different. There is always a new problem that needs to be solved or a new project that is different than the last. I enjoy these because you always have to be quick on your feet and think of innovative ways to solve these problems to ensure the overall success of your project.
“Without my MCAA student chapter and the MCA of Omaha, I would have never been able to make the connection with Ray Martin Co. and obtain an internship that I am still doing today. Finally, MCA-Omaha has also supported me financially through different scholarships. This is a big deal to me because it allows me to stay focused on school and reassures me that the local mechanical contractors support me and all the members of our chapter.”
MCAA and the John R. Gentille Foundation congratulate Bryce on this distinguished scholarship and thank the MCA of Omaha, Inc. for its commitment to supporting younger students keeping them invested in the mechanical contracting industry.
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.
Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:
Watts Water Technologies
Time is money. And with Watts Learn & Earn program, you can earn tokens for swag in less than 10 minutes. Learn about Watts products on demand from any device, collect, and get on with your day.
The Harris Products Group
Installing gas lines at field hospitals? Harris has the medical gas distribution equipment you need – manifolds, oxygen panels, regulators – and the system design experts to help you serve these critically-needed facilities. Call 1.800.733.4041, ext 2.
Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.
This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!
In a video message, UA General President Mark McManus and MCAA President Brian Helm discuss how cooperation, communication and common sense are fueling joint efforts to adapt to new working conditions as a result of the COVID-19 pandemic. The two organizations are working together and innovating to address changing conditions while at the same time protecting our workforce and our industry’s future.
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.
Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:
Carrier Corporation
Carrier’s new Ecoblue technology is the industry’s first beltless direct-drive vane axial fan system for select rooftop models designed to improve performance and efficiencies while decreasing maintenance and installation costs.
nVent
The nVent CADDY Rod Lock Strut allows for the quick creation and installation of trapeze assemblies. The pre-cut strut is ready to use out of the box and allows for quick prefab and easy installation.
Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.
This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!
A contracted estimator fell from an extension ladder when a cracked rung broke while he was climbing the ladder. The estimator was seriously injured, sustaining a skull fracture and multiple leg fractures. The estimator had been aware of the defect in the ladder. The defect was caused when the ladder fell at an earlier job site. However, the estimator continued to use the ladder rather than seeking a replacement. These ladder safety tips from CNA will help you keep workers safe.
Visit the Smart Solutions Case Studies area of our website! You’ll see how other mechanical contractors found their win-win with productivity-enhancing and cost-saving applications from members of MCAA’s Manufacturer/Supplier Council.
Plus, you’ll find tips and ideas on other ways you and your company can save money and enhance your productivity.
Colin Hindman has accepted a second summer internship with MCA of Indiana member, Harrell-Fish, Inc. (HFI). Colin is a junior studying Construction Management Technology at Purdue University where he is the President of the MCAA Student Chapter.
Harrell-Fish Internship
Colin reflects on what he will be doing during his internship:
I am continuing to work with the Project Management team in their Construction Division. I shadow and assist the PMs with their projects while also getting some projects of my own to manage under supervision. I also help out in estimating on occasion. I found the opportunity to work for them [Harrell-Fish] originally by being introduced to the VP by a family friend.
MCAA Student Chapter Involvement
As the Student Chapter president, Colin has been active with his student chapter:
Being a part of MCAA has both reinforced and built upon concepts I have learned in class, but most importantly on the job. My excellent experience working with HFI gave me a certain advantage when approaching the competition project. Conversely, the MCAA Student Chapter Competition taught me some valuable lessons that I’ve already been able to apply back in my internship.
Find other student chapter members like Colin by visiting mcaagreatfutures.org and previewing students’ resumes.
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.
Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:
SLOAN
Specifying the right faucet for your next commercial restroom project has never been easier. Sloan’s Faucet Finder lets you customize your perfect touch-free faucet, based on anything from spout design to spray type.
Baltimore Aircoil Company, Inc. The ENDURADRIVE™ Fan System Retrofit Kit is a direct drive motor system that provides 100% reliability on transmission components and a 90% reduction in maintenance costs, all while providing an increase in energy savings by 10%.
Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.
This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!
MCAA’s Virtual Trade Show connects our contractor members with the members of MCAA’s Manufacturer/Supplier Council.
Participating companies highlight and link to new products, product lines, services, solutions or web pages of particular interest. Here are just a few of the recent additions:
Jay R. Smith Mfg. Co.® a Member of Morris Group International
When you think of the Trap-Defender™, think of the number 3. This patented pressure-drop trap primer is activated by a pressure drop as low as 3 PSI and has a 3-year warranty. Learn more about the Trap-Defender and the entire line of Smith Fluid Controls™ Trap Primers and Distribution Units.
Parker Hannifin
Transair® is the original aluminium pipe work system for industrial fluids and your best solution for Compressed Air, Inert Gas and Vacuum applications.
Visit the Smart Solutions Case Studies area of our website to learn how other mechanical contractors found their win-win with cost-saving and productivity-enhancing applications from members of MCAA’s Manufacturer/Supplier Council.
This section of our website also includes tips and ideas to help your company save money and enhance your productivity. Don’t miss it!
